The innovative Litetronics® Plug & Play LED T8 Lamps convert existing T8 linear fluorescent troffers (among the most prevalent commercial, industrial, institutional light fixtures in use today) to more energy-saving, longer lasting linear LED tubes. The result is lower operating cost and lower total cost of ownership; a lower-energy/longer-life; and virtually maintenance-free interior lighting system for end-users reusing any facility’s existing T8 linear fluorescent troffers or fixtures.
Litetronics Plug & Play LED T8 Lamps deliver superior energy savings with evenly distributed, flicker-free luminous white-light output; preferred in today’s office buildings, restaurants, schools, retail stores, government buildings, plants, and warehouses. White LED light provides visual acuity, true color rendition, and long operating life with negligible maintenance.
Following other industry-successful Litetronics retrofit products, these new models replace two-, three-, or four-foot LED T8 tubes in an end-client’s existing ceiling- or wall-mounted housings with ease.
Litetronics Plug & Play LED T8 Lamps consume a mere 9, 11 or 15 watts, depending on tube length selected, providing greater than 50 percent energy savings while matching lumen output and distribution. With a rated operating life of 50,000 hours, facility owners and operators enjoy higher energy savings throughout many more years of use.
Litetronics Plug & Play LED T8 Lamps are backed by a five-year factory warranty.
Installation of Litetronics Plug & Play LED T8 Lamps takes only the time required to change a fluorescent tube, greatly reducing labor costs. After removing fluorescent lamps, Litetronics Plug & Play LED T8 Lamps simply twist securely into existing lamp holders.
Litetronics Plug & Play LED T8 Lamps take the guesswork and uncertainty out of fluorescent retrofitting for specifiers, lighting distributors, energy contractors, and end-users alike. Litetronics® Plug & Play LED T8 Lamps use the existing ballast and lamp holders, operate seamlessly on most ANSI-approved instant-start and program-start electronic fluorescent ballasts.
Litetronics Plug & Play LED T8 Lamps install quickly, negating the cost of removing and recycling perfectly good ceiling- or wall-mounted fluorescent housings. They are cUL US and DLC listed, FCC, and RoHS compliant. Available in 3500k, 4000k and 5000k color temperatures, they are cUL US and DLC listed, FCC, and RoHS compliant.
For more information, visit www.ledtronics.com/new-products/led-t8.html.
