Recognized as the most versatile and thinnest LED Ribbon Lights on the market, Outwater’s [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC] new series of 24-volt Single, Double, Triple and Single RGB Premium LED Ribbon Flex Lighting, with no fixtures to hide, can be easily mounted by means of incorporated 3M peel and stick double sided adhesive backing in all of those “hard to light” areas, or virtually any place that previously could not be lit.
The series is perfectly suited for illuminating furniture, in or under cabinets, wall units, showcases, displays, toe kicks, cove or cornice accents, or any type of indoor or outdoor application that warrants an almost nonexistent profile.
The highly flexible, diminutive physical contour of Outwater’s Single, Double, Triple and Single RGB Premium LED Ribbon Flex Lighting not only enables it to practically vanish within the décor of any environment, multiple lengths can be run off of a single power supply via supplied solder free, end-to-end plug-in, 100 percent usable connectors for continuous lighting.
In addition, Outwater’s ultra energy-efficient Premium LED Ribbon Flex Lighting features fully integrated LED Diamond Light Technology to yield the highest color rendering indexes and tightest binning codes for the purest, brightest LED Lighting available, yet consumes only a few watts per field cuttable strip, with an approximate 30,000 to 50,000 hour bulb life, depending on the format chosen.
Furthermore, low heat emissions and no generated UV radiation render Outwater’s Premium LED Ribbon Flex Lighting, with its achieved IP65 Rating (totally protected against dust and low pressure jets of water from all directions with limited ingress permitted), safe and ideally suited for a variety of residential and commercial uses.
For those requiring specific colors of lighting in which standard red, green, and blue primary colors will not suffice, Outwater’s Single RGB LED Ribbon Flex Lighting and newly introduced, IP67 Rated (totally protected against dust and the effect of immersion in liquid between 15cm and 1m) 120-volt LED Ribbon Flex Lighting offer a full spectrum of colors that can be programmed to morph at variable speeds or to remain static as desired.
Outwater’s additional LED Ribbon Flex Lighting variants encompass Offset LED (Standard Edge of Light) and Standard 12-volt versions as well as Chasing RGB, RGB with True White, Chasing Solid White and White Chameleon special effects models.
Create your own light fixture! Outwater also offers lighting designers a vast selection of LED Ribbon Aluminum Lighting Channels in many different shapes and sizes, both with and without snap on impact resistant frosted polycarbonate diffuser lenses, ABS, polycarbonate or aluminum end caps and stainless steel mounting clips in 4-foot, 6-1/2-foot, and 8-foot profiles for use in a wide range of functions.
Outwater’s Aluminum Lighting Channels are great for dissipating longevity robbing heat from LED Lighting by also functioning as a heat sink, thus prolonging the life and lumen output of the LED’s many times over.
A host of complementary accessories comprising different UL Listed power supplies, switches, dimmers, RGB controllers, sensor switches and other peripheral components readily enable a multitude of custom configurations and applications.
