The LM-30-3S-EW-TLR produced by Larson Electronics features a rotating boom that allows for 360° of rotation, a removable mast head for storing mounted equipment when not in use, and an easy fold over assembly for transportation and storing. The entire assembly is mounted onto a fourteen-foot single-axle trailer, allowing operators to transport this fold over boom from location to location.
The tower is constructed of square steel tubing with a lower section 12 feet in length and 4-by-4 inches-by-1/8-inch-thick, middle section 9.5 feet in length and 3-by-3 inches-by 1/8-inch-thick, and an upper section 8.5 feet in length and 2-by-2 inches-by-1/8-inch-thick. Each section has a one-foot overlap.
This light boom can be extended to a height of 30 feet for effective coverage and collapsed to 13.5 feet.
The mast is elevated using an included 1,000-pound rated electric winch with 3/16-inch galvanized steel cable and extended to its full height using a second 1,000 pound electric winch.
The 360° rotation is provided by a single T-Handle. By loosening the T-Handle, operators can rotate the mast with ease in either direction. It can be locked into place once the desired position is found by tightening the T-Handle.
This light mast is mounted to a 14-by-6-foot single-axle trailer via six 1/2-inch anchor bolts.
The two-wheel trailer is equipped 5,400 pounds axle and leaf springs with 15-inch tires. The trailer can support and haul an additional 3,500 pounds of equipment.
A standard two-inch ball coupling, two standard safety chains, and four-pin flat trailer plug allow for easy hookup and towing. This trailer features a proprietary mast guidance system, which provides increased stability during high winds.
Four 1,000-pound hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These outriggers can be extended two feet out from the side of the trailer for added stability. When lowered to 13.5 feet, the mast can withstand winds up to 125 miles per hour. This light tower assembly weighs approximately 1,200 pounds and can easily support and lift 150 pounds of weight.
“As a manufacturer, Larson Electronics can custom tailor these light tower units to customer specifications with longer sections and larger mounting plates,” said Rob Bresnahan with Larsonelectronics.com. “These trailer mounted masts are a great source for temporary lighting applications as well as for construction sites and security camera deployments.”
To view the entire Larson Electronics line of industrial grade lighting solutions, call 800/369-6671 or visit Larsonelectronics.com.
